Filter
Top Products
26
Printing to HP JetSend-enabled printers
The digital sender is an HP JetSend-enabled device. You can use its
HP JetSend capabilities to send to printers on your company’s
network that are HP JetSend enabled and have valid TCP/IP
addresses. If you receive a message requesting a TCP/IP address
when you press P
RINT
(F3), see the administrator.
You can send one copy at a time to one printer at a time.
Whether the
copies print single-sided or double-sided is determined by the
printer’s settings.
HP JetSend is a communications technology built into printers,
scanners, and computer software. HP JetSend-enabled devices can
connect, “talk” to each other, and exchange information directly from
the network. It is server- and program-independent. To find out more
about HP JetSend technology or view a list of supported printers, visit
www.jetsend.com
.
To send to an HP JetSend-enabled printer
Note
At any time before pressing to send the document, you can press
or B
ACK
(F4) to return to the main screen without saving any
settings.
1
Press P
RINT
(F3). This dialog box opens:
2
Do one of the following to choose an HP JetSend-enabled printer:
●
Use the and keys to select a printer from the list and
press E
NTER
.
●
Add a new printer to the list. (See
"
To add an HP JetSend-
enabled printer to the list
.”)
3
The Paper Size and Quality settings appear in the upper right
corner of the display. To change these settings, see
“
Changing
settings (optional)” on page 28
.
Device:
HP LaserJet 4000
--(IP Addres
BAC
NE
SETTIN
DELE