Filter
Top Products
60
Invalid credentials. Check
account name and password.
The name and password that
have been configured for
authenticating LDAP
searches are invalid.
Contact the administrator.
Invalid PIN. Job canceled. You incorrectly entered the
PIN (personal identification
number) for the HP JetSend-
enabled printer to which you
were sending.
Resend the document, entering the correct
PIN number.
JetDirect not responding.
Please check the card or the
firmware version.
The firmware version of the
HP JetDirect print server
(interface card) installed in
the digital sender is not
compatible with the product.
Contact the administrator.
JetSend subsystem busy. The digital sender has
another HP JetSend job
pending.
The pending HP JetSend job must complete
before you can submit another one. Wait and
retry.
LDAP protocol error.
Search error.
The LDAP search could not
complete because of a
problem with a network
connection or LDAP server.
●
Turn the digital sender off and then back
on.
●
If the problem persists, contact the
administrator.
Low resources. There is not enough space
on the hard drive to process
the job (for example,
because too many other jobs
are pending).
Try again later.
Missing page in second pass.
Job canceled.
You selected the duplex
mode, but there are fewer
pages in the second pass
than in the first.
Press any key to clear the message. Check
your pages and retry the job.
Network error
codes
. There is a problem with the
HP JetDirect print server.
●
Turn the digital sender off and then back
on.
●
Note the codes and contact the
administrator.
No destination available. No destination has been
configured for the
customized function key that
you selected.
Contact the administrator.
No matches found. There is no entry in the LDAP
directory that matches your
search string and search
criteria.
Check the accuracy of your search string
and search criteria.
No pages scanned. Job
canceled.
After a paper-jam error, you
did not reinsert a document
in the ADF.
Press any key to clear the message. Place
the document in the ADF and try again.
Control panel messages (continued)
Message Description Action