HP (Hewlett-Packard) 810 G1 D3K50UT Graphics Tablet User Manual


 
Inserting and removing a SIM
CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM, follow these steps:
1. Shut down the computer.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the battery bay toward you.
6. Remove the battery.
7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE: This computer uses micro SIM cards, which are smaller than standard SIM cards. A
standard SIM card will not fit into this slot.
NOTE: See the image on the battery bay to determine which way the SIM card should be
inserted into your computer.
8. Replace the battery.
NOTE: HP Mobile Broadband will be disabled if the battery is not replaced.
9. Reconnect external power.
10. Reconnect external devices.
11. Turn on the computer.
To remove a SIM, press in on the SIM, and then remove it from the slot.
18 Chapter 3 Connecting to a network