HP (Hewlett-Packard) 810 G1 D3K50UT Graphics Tablet User Manual


 
Removing the hard drive
To remove a hard drive:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Turn the computer upside down on a flat surface.
4. Remove the battery and the battery cover. (Refer to
Replacing a user-replaceable battery
on page 41.)
5. Remove the service bay cover. (Refer to
Removing or replacing the service door on page 50.)
6. Loosen the 1 hard drive screw. Pivot the hard drive to a forty-five degree angle, and then lift it
from the hard drive bay. The hard drive is a mini card SSD, which does not resemble
conventional hard drives.
Using hard drives 53