Filter
Top Products
Using Y
our CD–ROM Drive
2–7
Loading a CD–ROM Disc in a Horizontally Mounted Drive
This CD–ROM drive has an automatic loading/ejecting feature. To load a disc in the
CD–ROM drive, follow these steps:
1. Check that the workstation is powered on.
2. To open the Disc Tray, press and release the Load/Eject button on the CD–ROM
drive.
3. Ensure the disc holders are held away from disc by the disc holder retainers.
4. Hold the disc by the edges with the label side up and place it in the Disc Tray as
shown in Figure 2–3.
5. To close the Disc Tray, push the front of the disc tray gently towards the drive until
it closes by itself or press the Load/Eject button.
Figure 2–3. Placing the CD–ROM Disc in the Disc Tray (Horizontal Mount)