Filter
Top Products
Using Y
our CD–ROM Drive
2–10
Unloading a CD–ROM Disc in a Vertically Mounted Drive
1. Press the eject button to eject the disc tray from the drive. If the drive is in use, you
must you must unmount the disc to eject the disc tray. The emergency eject feature
allows you to eject the disc tray if the normal procedure fails. See Table 2–1.
NOTICE: You must unmount the disc before ejecting it from the drive. Refer
to the subsection, “Unmounting a CD–ROM Disc,” for instructions
on unmounting a disc.
2. Press down gently against the spring tension of disc holders A and B and swing the
top of the disc away from disc holder C, as shown in Figure 2–6
3. Remove the disc from disc holders A and B.
4. To close the Disc Tray, push the front of the disc tray gently towards the drive until
it closes by itself or press the Load/Eject button.
Disc Holder B
Disc Holder
A
Disc Holder C
Figure 2–6. Removing a CD–ROM Disc from the Disc Tray (Vertical Mount)