Filter
Top Products
2
Network setup
This section describes how to connect the HP All-in-One to a network and how to view
and manage network settings.
If you want to:
See this section:
Connect to a wired (Ethernet) network. Wired network setup
Connect to a wireless network with an
access point (802.11).
Integrated wireless WLAN 802.11 network
setup
Connect to a wireless network without an
access point.
Wireless ad hoc network setup
Install the HP All-in-One software for use
in a networked environment.
Install the software for a network
connection
Add connections to more computers on
the network.
Connect to additional computers on a
network
Change the HP All-in-One from a USB
connection to a network connection.
Note Use the instructions in this section
if you first installed the HP All-in-One with
a USB connection, and you now want to
change to either a wireless or Ethernet
network connection.
Change the HP All-in-One from a USB
connection to a network connection
View or change the network settings. Manage your network settings
Find troubleshooting information. Network troubleshooting
Note You can connect the HP All-in-One to either a wireless or wired network,
but not both at the same time.
Wired network setup
This section describes how to connect the HP All-in-One to a router, switch, or hub using
an Ethernet cable and how to install the HP All-in-One software for a network connection.
This is known as a wired or Ethernet network.
Basics Guide 9
Network setup