Filter
Top Products
12 HP Fax basics
Overview of menu options
Man Fax Rcv Code The Manual Fax Receive Code allows you to start receiving a fax from an
extension phone. If you pick up the extension phone and hear a fax tone,
enter the code and the fax will start receiving. You cannot change the * *,
just the number between them. The code can be 0 to 9.
ECM Mode Error correction mode compensates for poor line quality and ensures accurate,
error-free transmission with any other ECM-equipped facsimile machine. If the
line quality is poor, transmission time may be increased when ECM is
enabled.
The settings are
On
and
Off
.
Caller ID You can see the number of the person calling you. Before using this feature,
Caller ID service must be installed on your telephone line by the telephone
company.
The settings are
On
,
On w/ Junk Fax
, and
Off
. For more information, see Use
Caller ID on page 24.
Set Junk Fax No. If you have Caller ID set to
On w/ Junk Fax
, you can block faxes from
particular numbers. You must have received a fax from that number to block it.
Even though you have added junk fax numbers, if you turned off the Caller ID
option above, the Junk Fax protection will be removed. The settings are
Add
and
Delete
.
Auto Journal The Auto Journal shows the specific information concerning transmission or
reception activities, the time and date of most recent 40 transmissions or
receptions.
The settings are
On
and
Off
.
Distinctive Ring Distinctive ring (DRPD—distinctive ring pattern detection) is a service provided
by some telephone companies that assigns two phone numbers to one phone
line, each of which makes your phone ring differently. If you subscribe to this
service, you can program your machine to learn one phone number and
distinctive ring for incoming faxes. For more information, see Distinctive ring
(DRPD) on page 27.
Resolution Sets the default resolution when copying and faxing.
The settings are:
Standard
,
F
ine, and
Superfine
. For more information,
see Set document resolution and contrast for a single copy on page 21.
Contrast Sets the default contrast when copying and faxing.
The settings are:
Normal
,
Lighten
,
Photo
, and
Darken
. For more
information, see Set document resolution and contrast for a single copy on
page 21.
Image TCR Image TCR prints a sending confirm page with a miniature image of the first
page of the fax. The settings are
On
and
Off
. For more information, see
Image TCR on page 26.
Dial Mode Set the dialing mode to the type of the exchange to which you are connected:
Tone
or
Pulse
.
Option Settings
CB782-90008_UG_EN.book Page 12 Monday, October 8, 2007 6:55 PM