Filter
Top Products
Menu item Sub-menu item Sub-menu item Values Description
Tray Behavior Use Requested Tray Exclusively (default)
First
Control how the device handles jobs that
have specified a specific input tray.
Manually Feed
Prompt
Always (default)
Unless Loaded
Specify how a prompt should appear when
the type or size for a job does not match the
specified tray and the device pulls from the
multipurpose tray instead.
PS Defer Media Enabled (default)
Disabled
Select either the PostScript (PS) or HP paper-
handling model.
Use Another Tray Enabled (default)
Disabled
Turn on or off the control-panel prompt to
select another tray when the specified tray is
empty.
Size/Type Prompt Display (default)
(default)
Do not display
Control whether the tray configuration
message appears whenever a tray is opened
or closed.
Duplex Blank Pages Auto (default)
Yes
Control how the device handles two-sided
jobs (duplexing).
Image Rotation Standard (default)
Alternate
Image rotation allows users to put paper in
the input tray using the same orientation
regardless of whether there is a finisher
installed.
Select Standard to match the loading
orientation of other devices that have a
finisher.
Select Alternate to use a different loading
orientation that might work better with
preprinted forms that are used on legacy
products.
Stapler/Stacker Staple None
One
If the optional stapler/stacker is installed, use
this feature to set stapling characteristics for
the device.
Staples Out Continue (default)
Stop
MBM-3
Configuration
Operation Mode Function Separator
Mailbox
Stacker
Configure the optional 3–bin mailbox
accessory.
Table 2-15 Device Behavior menu (continued)
44 Chapter 2 Control panel ENWW