Filter
Top Products
Covers and control panel
Left cover
NOTE: No tools are necessary to remove this cover. However, a small flat-blade screwdriver might
be helpful in releasing some of the tabs that hold the cover to the product chassis.
1. Remove the Tray 2 cassette.
2. Open the toner cartridge door and the rear jam access door.
3. Grasp the front edge of the cover, and then pull the cover toward the front to release the four tabs
(callout 1).
Figure 1-12 Remove the left cover
1
4. With the top and front edges loose, carefully slide the cover toward the back of the product, and
then remove it.
ENWW
Removal and replacement procedures
11