Filter
Top Products
Top cover with touchscreen control-panel module
1. Remove the following components:
●
Tray 2 cassette
●
Right cover. See
Right cover on page 12.
●
Left cover. See
Left cover on page 11.
2. Open the toner cartridge door and the rear jam access door.
3. On the left side of the product, disconnect one flat cable (callout 1) from the formatter, and then
remove two screws (callout 2).
Figure 1-19 Remove the top-cover assembly (1 of 3)
2
1
16 Chapter 1 Removal and replacement ENWW