Filter
Top Products
Motors and fans
Main motor
1. Remove the following components:
●
Tray 2 cassette
●
Right cover. See
Right cover on page 12.
●
Left cover. See
Left cover on page 11.
●
Top cover assembly. See
Top cover with touchscreen control-panel module on page 16 or
Top cover with LCD control-panel module on page 13.
●
Rear cover, rear door, and duplex-paper-feed assembly. See
Rear cover, rear door, and feed
assembly on page 20.
●
Fuser. See
Fuser assembly and paper feed guide on page 29.
●
Engine controller assembly (DC controller). See
Engine controller assembly (DC controller)
PCA on page 41.
2. Open the toner cartridge door and the rear jam access door.
3. At the rear of the product, release the cables (callout 1) from the cable guides (callout 2), and then
pull out the paper feed assembly (callout 3).
Figure 1-47 Remove the main motor (1 of 4)
3 1 2
ENWW
Removal and replacement procedures
37