Filter
Top Products
7
Using the CD-ROM
Drivers
For detailed information about drivers, refer to the appropriate README file in the DRIVERS
directories on the HP StorageWorks Tape CD-ROM. There is a separate sub-directory for each
operating system.
HP Library & Tape Tools
HP Library & Tape Tools software provides diagnostic and troubleshooting utilities. It allows
you to identify your product correctly, check SCSI ID information on the SCSI bus, run tests,
carry out firmware upgrades and, if necessary, generate comprehensive troubleshooting
information for support calls. For further details see page 37.
User documentation
Refer to the “User Documentation” topic on the HP StorageWorks Tape CD-ROM for a UNIX
Configuration Guide and an online User’s Guide that provides more detailed information
about using your HP StorageWorks DAT autoloader.
Refer to your backup application’s documentation for instructions on how to back up and
restore data.
CD-ROM guide
The CD-ROM guide provides an overview of the CD directory structure and information about
the languages in which the contents of the CD-ROM are available. It also contains a set of
URLs and links for further information.
HP product registration
To register your new autoloader electronically via the web, use the “Product Registration” link
on the HP StorageWorks Tape CD-ROM.
The HP StorageWorks Tape CD-ROM contains drivers, useful utilities and information to help
you install and use your autoloader. Before installation, Windows and HP-UX users can use
the HP Library & Tape Tools software to check SCSI ID information on the SCSI bus. Other
UNIX users may like to print off the UNIX Configuration Guide.
autoload_master-frame6.fm Page 7 Monday, December 29, 2003 9:39 AM