HP (Hewlett-Packard) Desk-Jet Printer Printer User Manual


 
58
Media size
Custom size: Width: 3.0 to 8.5 in
77 to 215 mm
Length: 3 to 14 in
77 to 356 mm
U.S. letter 8.5 x 11 in
Banner U.S. letter 8.5 x 11 in
U.S. legal 8.5 x 14 in
Executive 7.25 x 10.5 in
U.S. No. 10 envelope 4.13 x 9.5 in
Invitation A2 envelope 4.37 x 5.75 in
Index card 3 x 5 in
77 x 127 mm
Index card 4 x 6 in
102 x 152 mm
Index card 5 x 8in
127 x 203 mm
European A4 210 x 297 mm
European A5 148 x 210 mm
Banner European A4 210 x 297 mm
B5-JIS 182 x 257 mm
European DL envelope 220 x 110 mm
European C6 envelope 114 x 162 mm
European A6 card 105 x 148 mm
Japanese Hagaki postcard 100 x 148 mm
Media handling
Sheets: up to 100 sheets
Banners: up to 20 sheets
Envelopes: up to 15 envelopes
Cards: up to 30 cards
Transparencies: up to 25 sheets
Labels: up to 20 sheets of Avery paper labels.
Use only U.S. letter-sized or A4-sized
sheets. Use only Avery paper labels
specifically designed for use with HP
inkjet printers.
OUT tray capacity: up to 50 sheets
Power requirements
Power Adapter (universal input)
Input Voltage: 100 to 240 VAC (±10%)
Input Frequency: 50 to 60 Hz (±3 Hz)
Automatically accommodates the world-wide range of AC line
voltages and frequencies. There is no on/off switch on the power
adapter.
Power consumption
5 watts maximum when off
5 watts maximum nonprinting
30 watts maximum printing
Operating environment
Maximum operating temperature:
41°F to 104°F, 5°C to 40°C
Humidity: 15 to 80% RH noncondensing
Recommended operating conditions for best print quality: 59°F to
95°F or 15°C to 35°C
20 to 80% RH noncondensing
Storage temperature: -40°F to 140°F, -40°C to 60°C
Declared noise emissions in accordance with ISO 9296:
Additional symbol sets
and fonts
Additional symbol sets and fonts may have been
included with your printer on separate DOS Character
Set Installation disks.
Installing a special symbol set
or font on your computer
Install the printer software as described in the setup
guide.
Put the first installation disk into your computer’s
floppy disk drive.
If you are running Windows 95 or Windows 98, click
Start, and then click Run. If you’re running Windows
3.x, in the Program Manager, click File, and then
click Run.
Type the letter of the computer’s floppy disk drive
(usually A:\ or B:\) followed by PCLSETUP and press
the ENTER key. For example:
C:\>A:\PCLSETUP
Follow the directions on the computer screen.
Remove the last installation disk from the floppy
drive when the installation is completed.
Available symbol sets and fonts
See the appropriate language option in the
following list.
Hebrew
Symbol Sets: Latin/Hebrew (ISO-8859/8)
PC Hebrew (CP-862)
Fonts:
Proportional Spaced Point Sizes
David PS 5, 6, 7, 8, 10, 12, 14
NarkisTam 5, 6, 7, 8, 10, 12, 14
Miriam PS 5, 6, 7, 8, 10, 12, 14
Miriam PS Italic 5, 6, 10, 12
Fixed Space Point Sizes Pitches
Courier 6, 12, 24 5, 10, 16.67, 20
Courier Italic 6, 12, 24 5, 10, 20
Miriam 6, 12, 24 6, 12, 24
Miriam Italic 6, 12, 24 6, 12, 24
David 6, 12, 24 5, 10, 16.67, 20
Normal
Mode
Sound power level, L
WAd
(1B=10dB): 5.5 B
Sound pressure level, L
pAm
(bystander positions): 42 dB