Filter
Top Products
2. Remove the connector frame (2) from the base enclosure.
3. Remove the power connector (1) from the connector frame.
4. Remove the modem connector (2) from the connector frame.
Reverse this procedure to install the power connector cable and modem cable.
ExpressCard assembly
Description Spare part number
ExpressCard assembly 417112-001
Before removing the ExpressCard assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Component replacement procedures 109