WWAN module
CAUTION: The WWAN module and the WLAN module are not interchangeable.
Description Spare part number
HP ev2210 1xEVDO-A WWAN module for use in the United States 451131-001
HP UMTS/HSDPA/EDGE WWAN module, including GPRS 459350-001
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore computer functionality, and then contact technical support through Help and Support.
Before removing the WWAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 56).
5.
Remove the SIM (see
SIM on page 69).
6.
Remove the keyboard (see
Keyboard on page 74).
Remove the WWAN module:
1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the WWAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
2. Disconnect the WWAN antenna cables (2) from the terminals on the WWAN module.
NOTE: The red WWAN antenna cable is connected to the WWAN module “Main” terminal. The
blue WWAN antenna cable is connected to the WWAN module “Aux” terminal.
78 Chapter 4 Removal and replacement procedures