HP (Hewlett-Packard) DV2700 Laptop User Manual


 
Display assembly
Description Spare part number
14.1-inch, WXGA, BrightView, display assembly for use only with computer models equipped with a
camera module (includes camera module, microphones, and WLAN transceivers and antenna cables)
448604-001
14.1-inch, WXGA, BrightView, display assembly for use only with computer models not equipped
with a camera module (includes microphones and WLAN transceivers and antenna cables)
448603-001
14.1-inch, WXGA, BrightView, display assembly for use only with computer models sold at Best Buy
(includes camera module, microphones, and WLAN transceivers and antenna cables)
451906-001
14.1-inch, WXGA, BrightView, display assembly for use only with computer models with Intel
processors and equipped with a WWAN module (includes camera module, camera module cable,
microphones, and WLAN transceivers and antenna cables)
451905-001
14.1-inch, WXGA, BrightView, display assembly for use only with Artist Edition computer models
equipped with a camera module (includes microphones, and WLAN transceivers and antenna cables)
462527-001
14.1-inch, WXGA, BrightView, display assembly for use only with white Special Edition computer
models equipped with a camera module (includes microphones, and WLAN transceivers and antenna
cables)
466183-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 56).
5.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 65).
6.
Remove the following components:
a.
Keyboard (see
Keyboard on page 74)
b.
Switch cover (see
Switch cover on page 79)
Remove the display assembly:
1.
Close the computer and turn it upside down, with the rear panel toward you.
82 Chapter 4 Removal and replacement procedures