Filter
Top Products
15. Slide the webcam/microphone module to the right, and then lift it from the display (2).
16. Disconnect the webcam/microphone module cable (3) from the webcam/microphone module.
17. Remove the webcam/microphone module. The webcam/microphone module is available using
spare part number 512827-001.
18. Disconnect the display inverter from the double-sided tape securing it to the display, and then
release the display inverter (1) as far from the display bezel as the display panel cable and backlight
cable allow.
19. Disconnect the backlight cable (2) and display panel cable (3) from the display inverter.
20. Remove the display inverter. The display inverter is available using spare part number
488317-001.
21. If it is necessary to remove the display panel cable, remove the adhesive reinforcement strip (1)
from the connector, and then disconnect the cable from the connector (2).
22. Remove the tape that secures the display panel cable to the bottom of the display (3).
72 Chapter 4 Removal and replacement procedures