Filter
Top Products
6. Remove the hard drive (see Hard drive on page 48).
7. Remove the memory modules (see
Memory modules on page 51).
8. Remove the WLAN module (see
WLAN module on page 52).
9. Remove the optical drive (see
Optical drive on page 55).
10. Remove the base enclosure (see
Base enclosure on page 64).
Remove the subwoofer:
▲
Disconnect the subwoofer cable (1), remove the 3 screws (2), and then remove the subwoofer (3)
and 3 rubber grommets (4).
Reverse this procedure to install the subwoofer.
Component replacement procedures
71