Filter
Top Products
Hard drive cable
Description Spare part number
Hard Drive Hardware Kit (includes cable, cover, and screws) 732279-001
Before removing the hard drive cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 32).
5. Remove the base enclosure (see
Base enclosure on page 33.
6. Remove the battery (see
Battery on page 37.
7. Remove the hinge assembly (see
Hinge assembly on page 36.
To remove the hard drive cable:
1. Postion the HDMI board upside down.
2. Pull the hard drive cable straight up to disconnect it from the connector on the HDMI board.
Reverse this procedure to install the hard drive cable.
40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts