Filter
Top Products
Weight
The weight is not spared.
Before removing the weight, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 32).
5. Remove the base enclosure (see
Base enclosure on page 33.
6. Remove the battery (see
Battery on page 37.
Remove the weight:
1. Remove the Phillips PM2.5×5.0 screw (1) that secures the weight to the dock.
2. Remove the weight from the dock (2).
NOTE: The weight may also be secured to the dock with adhesive.
Reverse this procedure to install the weight.
44 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts