Filter
Top Products
Home LED board
Description Spare part number
Home LED board 737898-001
Before removing the home LED board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 32).
5. Remove the display rear cover (see
Display rear cover on page 45).
6. Disconnect the battery cable (see
Battery cable on page 46).
7. Remove the bottom trim (see
Bottom trim on page 61).
To remove the home LED board:
1. Disconnect the cable from the connector on the board (1).
2. Lift up to disengage the adhesive that secures the board from the tablet (2) and remove the board.
Reverse this procedure to install the home LED board.
Tablet components 63