Filter
Top Products
Vibration module
Description Spare part number
Vibration module 732272-001
Before removing the vibrating motor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 32).
5. Remove the following components:
●
Display rear cover (see
Display rear cover on page 45)
●
Fan (see
Fan on page 48)
●
Heat sink (see
Heat sink on page 49)
●
WLAN module (see
WLAN/Bluetooth combo card on page 51)
●
Display cable (see
Display cable on page 56)
●
Touchscreen board cable (see
Touchscreen board on page 58)
●
Volume board cable (see
Volume board on page 59)
●
Bottom trim (see
Bottom trim on page 61)
●
Audio board (see
Audio board on page 64)
●
Card reader cable (see
Card reader on page 66)
●
Speakers (see
Speakers on page 67)
●
Battery (see
Battery on page 68)
●
Frame (see
Frame on page 69)
Remove the vibration module from the display:
▲
Locate the vibration module on the side of the tablet, and then remove the vibrating motor .
74 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts