Filter
Top Products
Power connector
Description Spare part number
Power connector 732288-001
Before removing the power connector, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 32).
5. Remove the base enclosure (see
Base enclosure on page 33.
6. Remove the battery (see
Battery on page 37.
7. Remove the hinge assembly (see
Hinge assembly on page 36.
Remove the power connector:
1. Remove the Phillips PM2.5×5.0 screw (1) that secures the power connector bracket to the dock.
2. Lift the bracket up and out of the dock (2).
3. Remove the power connector (3) from the dock.
Reverse this procedure to install the power connector.
Dock components 43