Filter
Top Products
2. Tighten the upgrade bay screw (2).
3. Replace the service door (see Replacing the service door on page 67).
4. Insert the battery (see
Inserting or removing the battery on page 51).
5. Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
6. Turn on the computer.
To install an optical drive in the upgrade bay:
1. Insert the optical drive into the upgrade bay (1).
2. Tighten the upgrade bay screw (2).
3. Replace the service door (see Replacing the service door on page 67).
4. Insert the battery (see
Inserting or removing the battery on page 51).
Using hard drives 75