HP (Hewlett-Packard) E3S64UT#ABA All in One Printer User Manual


 
The optical drive data cable connects to the SATA3 and SATA PWR3 system board connectors.
NOTE: The drive bracket is not spared. When replacing an optical drive, remove the bracket from
the old drive and install it on the new drive.
1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 33).
2. Remove the access panel (see
Access panel on page 37).
3. Lift the tab at the back of the optical disc drive enclosure to release the drive.
NOTE: When replacing an optical drive, remove the bracket from the old drive and install it on
the new drive. The bracket is not spared.
48 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis