Filter
Top Products
Removing the Covers
Right Side Cover Removal
LJ 4/4 Plus
1 Open the Top Cover and release the Right Side Cover by
pressing at the points shown in Figure 6-2.
2 Fold the cover away from the printer to release the bottom
supports and lift the door off of the printer frame.
LJ 5
1
Open the Top Cover and loosen the retaining screw on the
right side cover located at the upper right rear of the printer.
2 Slide the right side cover back and fold the cover away from
the printer to release the bottom supports.
WARNING!
Since the handle is part of the right side cover,
the retaining screw must be fully tightened or
printer damage or personal injury may result.
Figure 6-2 Right Side Cover Release Points
6-4 Removal and Replacement