Filter
Top Products
Envelope Feeder Installation
For complete information about installing the Envelope Feeder,
see Envelope Feeder User’s Guide. This guide is provided with the
envelope feeder. The instructions below are not intended to
replace the information of the Envelope Feeder User’s Guide.
Note
The LaserJet 4, 4 Plus, and 5 printers all use
different envelope feeder products.
To install the Envelope Feeder:
1
Turn OFF the printer.
2
Open the MP tray.
3 Remove the black plastic cover from inside the printer (see
Figure 3-21).
Figure 3-21 Remove the Black Plastic Cover
Configuration 3-49