Filter
Top Products
Redefining the hp-HIL Search Path
The X*devices file can be used to redefine the path searched for hp-HIL devices. By default, the path
searched is /dev/hil. The device files are named by appending the numbers "1" through "7" to the path.
The path is redefined by adding an entry to the X*devices file with the following form: <path>
<hil_path> #<comment>
where:
<path>
Specifies the path to be searched for the hp-HIL input devices.
#<comment>
Describes the path. Comments are optional, but if present, must be preceded by a "#".
The X server appends the numbers "1" through "7" to the specified path. For example, specifying:
/tmp/fred hil_path
results in the device names /tmp/fred1, /tmp/fred2, and so on.
Stopping the X Window System
After stopping all application programs, stop the window system by holding down the and
keys, and then pressing the key. This stops the display server, and with it the window
system. (If you have a PC-style keyboard, press
instead.)
The sequence of keys that stops the display server can be customized in the X*pointerkeys file. Refer to
the X0pointerkeys file in /etc/X11.
Graphics Administration Guide for HP-UX 10.20
Page 86