Filter
Top Products
HP Hub & Switch Management Admin
HP Admin Parameters
Table 10-4. Printer Configuration Parameters
Parameter Description
Set As Default Sets the printer selected in the “Installed Printers” box as the default
printer.
Remove Removes a selected printer from the “Installed Printers” list.
Add Displays a list of supported printers that you can select and add to
the “Installed Printers” list.
Test Print Prints a sample test file to a selected printer if the printer
configuration has been saved (see the OK button).
OK Saves the configuration and returns to the main HP Admin dialog box.
Cancel Returns to the main HP Admin dialog box without saving
configuration changes.
Help Accesses the HP Admin online help system.
Management Admin
HP Hub & Switch
OpenView Configuration Options
You can change the way that OpenView and HP Hub & Switch Management
interact by setting these options:
■ ForceMapUpdates
■ NoMapWalk
■ Trace
■ Distributed Console
These options provide advanced tuning capabilities for knowledgeable users
of OpenView. You do not need to use them to run the application.
Any changes that you make will not take effect until the next time that
OpenView (ovw) is run.
10-11