Filter
Top Products
Management for Non-Browserable Devices
Overview of Toolbar Functions
Table 11-1. Summary of Toolbar Functions
Icon Toolbar Button Description
Diagnose Displays a pop-up menu list of device or network
test functions. The tests that can be performed
depend on the type of device.
Security Displays a tabbed dialog box for configuring
security:
• Authorized Managers: The network
management stations that can send and receive
SNMP requests for this device.
• Community Names: Names that are valid for
SNMP requests to the device or stack of hubs. A
read and write level are specified for each
community name.
• Security Policy: Set global security for all
devices of the same type on your network.
• Port Security: Configure Intruder Detection and
Eavesdrop Prevention for each port.
• Intrusion Log: View security intrusions for a
device.
Enable Port Enables a selected hub port. If a password is
assigned to the hub, you must log on to the hub
before you can change the state of a port.
Disable Port Disables a selected hub port. If a password is
assigned to the hub, you must log on to the hub
before you can change the state of a port.
Logoff Displays a Logoff dialog box. If a hub or bridge has
a password, you can log off the device to prevent
configuration changes.
VLAN
Configuration
Displays the VLAN Configuration window.
Management for Non-
Browserable Devices
11-6