Filter
Top Products
Management for Non-Browserable Devices
About Closeup Views
Displaying the Closeup View
You can display a Closeup View in several ways, including the following:
■ From an HP OpenView map, use the left mouse button and double-click
on a hub, bridge, or switch symbol.
■ On an HP OpenView map, select a hub, bridge, or switch symbol. Then
display the Monitor menu and select HP Hub/Switch.
■ From a Closeup View of an SNMP-based AdvanceStack hub, display the
list of chained hubs by clicking on the Chained Devices button. The list
displayed identifies each chained hub by MAC address and hub type.
Select the MAC address for the desired hub.
■ Right-mouse-click on a device symbol and select Monitor HP Hub/
Switch.
Management for Non-
Browserable Devices
Figure 11-1. Switching Hub Closeup View
11-2