Filter
Top Products
Loading small media
To load small media in the input tray
NOTE You can also use the front manual feed slot. If you are printing on thick paper (such
as cardstock), you can use the rear manual feed slot. See
Printing with the front or rear
manual feed slot.
1. Raise the output tray and remove any media from the input tray.
2. Insert a stack of media that does not exceed the height of the paper guide, print-side down along
the right side of the input tray until it stops.
3. Open the small media guide by moving it 90 degrees clockwise from start to end position.
4. Press the button on top of the paper guide and slide the guide to the right until it stops at the
edge of the media.
ENWW Loading small media 23