Filter
Top Products
Chapter 4—Load paper or transparency film, or load originals 13
HP OfficeJet K Series
Load originals
If you are working with originals that are printed on 16-24 lb. (60-90 gsm) plain paper or
HP Premium Inkjet paper, you can load more than one in the automatic document feeder
(ADF). If you are working with photos or originals of an odd size (no smaller than 3-by-
3 inches or 76-by-76 millimeters), load them in the ADF one at a time. When working with
fragile, torn, or odd-sized originals, we recommend that you use a document sleeve or
sheet protector (available from most office-product stores) for the original. Place a
single sleeve into the ADF with the sealed edge first and the transparent side down.
1 Place the original(s) in the ADF with the printed side facing toward the back and
with the top of the document pointing down.
2 Adjust the document guides to fit your document.
Avoid paper jams
To avoid paper jams, remove papers from the output tray frequently. Output tray
capacity is affected by the type of paper and the amount of ink you are using. For more
information about output-tray capacity, see “Technical information.” For help with
clearing a paper jam, see the Troubleshooting Help available through the Director.
EasOrPrn.book Page 13 Friday, June 28, 2002 3:06 PM