Filter
Top Products
HP CONFIDENTIAL
File Name: 339674-1.doc Last Saved On: 8/14/03 3:54 PM
62 HP KVM Server Console Switch User Guide
IMPORTANT: Selecting the checkbox beside each server to be added
to the scan list creates the scan list. The creation of a scan list does not
start the Scan mode. You must enable Scan mode through the Scan
Enable checkbox on the Commands dialog box.
NOTE: If the user removes a server from the Device Modify dialog box
later, the change can affect a custom scan pattern.
Removing Servers from the Scan List
1. From the Scan dialog box ("Activating Scan Mode" on page 62), click the
server to be removed.
-or-
Double-click a server name or port.
-or-
Click Clear to remove all servers from the scan list.
2. Click OK to save settings.
Activating Scan Mode
1. From the Commands dialog box ("Accessing the Commands Dialog Box" on
page 68), select Scan Enable.
2. Click X to close the Commands dialog box.
NOTE: The scanning begins as soon as you click Scan.
Deactivating Scan Mode
If the OSD is open, select a server.
-or-
If the OSD is not open, move the mouse or press any key on the keyboard.
Scanning stops at the currently selected server.
-or-