Filter
Top Products
HP CONFIDENTIAL
File Name: 339674-1.doc Last Saved On: 8/14/03 3:54 PM
8 HP KVM Server Console Switch User Guide
• Firmware CD kit
This kit might contain extra hardware for your convenience.
Required Items Not Included
• PS/2 Interface Adapter or USB Interface Adapter
• UTP CAT5 cable (CAT6 and CAT7 may be also used)
Optional Items
Expansion Module ("Installing the Expansion Module" on page 23)
Required Tools
• Phillips screwdriver
• T-25 Torx driver
Rack Mounting the HP KVM Server Console Switch
NOTE: Before installing the HP KVM Server Console Switch into the
rack, connect the HP KVM Server Console Switch to a power source,
using the power cords provided, and power on the unit. An activity
indicator light ("Components" on page 17) is displayed after a few
seconds. If the activity indicator light does not display, be sure that the
power is on, the power cord is connected, and the power source is valid.
Several rack mounting configurations include:
• Side-mount
− Type A—Square- and round-hole rails
− Type B—Square-hole rails
NOTE: The HP KVM Server Console Switch cannot be side-mounted
into a rack with round-hole rails.
• Standard-mount