Filter
Top Products
9. Unlock the take-up reel spindle by pushing the spindle lever to its uppermost position.
10. Remove the roll from the printer, pulling out the end on the right side of the printer first. Do not
insert your fingers into the spindle supports during the removal process.
11. To remove the roll from the printer after you have unloaded the take-up reel, see Unload a roll from
the printer on page 22.
View information about the substrate
On the printer's front panel, select the icon, and then select View loaded substrate > View substrate
details.
The following information appears on the front panel:
●
The roll status
●
The substrate family that you have selected
●
The width of the substrate in millimeters (estimated by the printer)
If no substrate is loaded, the message Out of substrate appears.
The same information appears on the Embedded Web Server's Supplies page.
Store the substrate
The following are tips for storing substrate:
●
Always keep unused rolls wrapped in the plastic wrap to prevent discoloration. Rewrap partially
used rolls if they are not being used.
●
Do not stack rolls.
ENWW View information about the substrate 31
Handle the substrate