Filter
Top Products
5. Slide the drawer and cartridge into the slot until they lock into position.
If you have difficulty, see the Maintenance and troubleshooting guide.
6. The front-panel display confirms that all cartridges have been correctly inserted.
Replace a printhead
Printhead replacement must be performed after the printer has been turned on with the hard power
switch at the back of the printer.
WARNING! Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent
the printer from moving.
WARNING! Make sure the printer has cooled down before removing a printhead. The printer will beep
if it is still hot.
ENWW Work with ink system components 47
Handle the ink system