Filter
Top Products
●
Avoid standing close to the fans, which could cause injury and could also affect print quality (by
obstructing the air flow).
●
Do not touch gears or moving rolls during printing.
Heavy substrate hazard
Special care must be taken to avoid personal injury when handling heavy substrates.
●
Handling heavy substrate rolls may require more than one person. Care must be taken to avoid
back strain and/or injury.
●
Consider using a forklift, pallet truck or other handling equipment.
●
When handling heavy substrate rolls, wear personal protective equipment including boots and
gloves.
Ink handling
Your printer does not use solvent inks and does not have the traditional problems associated with them.
However, HP recommends that you wear gloves when handling ink system components.
Warnings and cautions
The following symbols are used in this manual to ensure the proper use of the printer and to prevent
the printer from being damaged. Follow the instructions marked with these symbols.
WARNING! Failure to follow the guidelines marked with this symbol could result in serious personal
injury or death.
CAUTION: Failure to follow the guidelines marked with this symbol could result in minor personal injury
or damage to the product.
Warning labels
Label Explanation
Risk of burns. Do not touch the internal enclosures of drying
and curing modules of the printer.
Risk of burns. Do not touch the drying enclosure of the printer.
Even after opening the window latch, which disconnects the
power to the drying and curing modules, the internal surfaces
could be hot.
Electric shock hazard. The printer has two input power cords.
A voltage is still present in the drying and curing modules after
the main switch is turned off. There are no operator-
serviceable parts inside the printer. Refer servicing to qualified
service personnel. Disconnect all power cords before
servicing.
ENWW Safety precautions 3
Introduction