Filter
Top Products
Special media for printing
This device supports printing on special media.
Envelopes
●
Store envelopes flat.
●
Envelopes should not be wrinkled, nicked, stuck together, or otherwise damaged. Do not use
envelopes that have clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic
materials.
●
Only use envelopes where the seam extends all the way to the corner of the envelope as indicated
in the following illustration.
1 Acceptable
2 Unacceptable
●
Envelopes that contain a peel-off adhesive strip or more than one flap that folds over to seal must
use adhesives that are compatible with the heat and pressure in the fuser.
CAUTION: Failure to follow these guidelines can result in jams.
Labels
When selecting labels, consider the quality of each component:
●
Only use labels that have no exposed backing between them.
●
Labels must lie flat.
●
Do not use labels that have wrinkles or bubbles, or are damaged.
●
Use only full sheets of labels. This device does not support printing on partial sheets of labels.
For instructions on loading labels, see
Print Types and tray capacity on page 31
Transparencies
●
For tray, media-orientation, and driver settings, see
Print Types and tray capacity on page 31.
●
Place transparencies on a flat surface after removing them from the device.
ENWW Special media for printing 25