Filter
Top Products
248 Chapter 9 – Image quality EN
• The media does not meet HP paper specifications or is stored
improperly.
• The toner cartridge is defective.
• The transfer roller is dirty or defective.
• The page is too complex. (There is not enough memory to process
the page.)
– Reduce the resolution through the software or printer driver. See
the online help for printer driver issues.
• Use media that meets HP paper specifications.
– The surface of the media is too rough or the media’s surface is
too smooth for proper toner adhesion.
– The moisture content of the media is too high.
– Printing is on the wrong side of the media.
– The transparencies are not designed for proper toner adhesion.
• The printer driver is not set for the correct media.
• The fuser is defective.
– Check for a wrap jam in the fuser.
Blank spots
Bottom of page is blank or graphic image is cut off
Character voids