250 Chapter 9 – Image quality EN
• The media does not meet HP paper specifications or is stored
improperly.
• The printer operating environment does not meet HP specifications.
• The wrong output bin is selected.
• The connection of the cables to the laser/scanner is poor.
• The connection of the cables to the ECU is poor.
• The laser/scanner is defective.
• The ECU is defective.
• A single sheet of paper is defective.
• The print density needs to be adjusted.
• The moisture content of the media is uneven, or the media has
moist spots on it.
• The media lot is bad.
• A draft mode or economy mode is selected in the software.
• The fuser setting was wrong for the media type.*
• The toner cartridge is defective.
*This feature does not apply to all products.
Distorted image
Dropouts