Filter
Top Products
EN Alphabetical messages 47
1
1 Reinsert the specified tray.
2 Check for damaged tabs in the tray.
3 Check for damaged switches in the printer.
4 Replace the PCA controller in the feeder.
Reenter the date and time.
1 Run the keypad test again.
2 If the error persists, try each of the following in the order given:
• Check the cabling.
• Replace the control panel.
• Replace the formatter.
Wait for the program to load.
1 Press S
TART to continue scanning. If START is not pressed within a
few seconds, the message disappears, and the document scanner
stops scanning because it thinks the page has jammed.
2 If sending a fax or copying a document longer than 991 mm
(39 inches), the control panel configuration can also be set to “Send
long pages.” This ensures that long pages feed without having to
monitor the task. Press S
TART before the document scanner shuts
off.
Install tray [x]
Invalid date or time
Keypad test failed
Loading program <number> alternates with
Do not power off
Long page? START to continue