Filter
Top Products
EN Numerical messages 71
1
1 Reload the tray with the correct media size.
2 Ensure the media in the tray is loaded under the front and back tabs.
Check sensors PS103 and PS106 for proper operation.
3 If you are trying to print from tray 1, make sure that the paper-size
setting in the printer control panel is configured correctly.
4 If you are printing from tray 2, 3, or 4, verify that the three paper-size
adjustments (length guide, width guide, and size-selector switch) on
the paper tray have been made correctly. Make sure that the media
is under the corner tabs.
5 Press G
O. The page containing the error is automatically reprinted.
OR
Press C
ANCEL JOB to clear the job from the printer’s memory.
1 This error usually occurs with smooth media, such as
transparencies or labels.
• If the error persists when using tray 1, load media one sheet at a
time.
• If the error persists when using trays 3 and 4, replace the feed
and separation rollers.
2 Check sensors PS102 and PS103 for proper operation.
41.3 Unexpected paper size alternates with
Load tray [x] type size
41.5 Printer error