Filter
Top Products
3. Touch the TCP/IP Config menu, and then touch the Manual button.
4. Use the numeric keypad to enter the IP address, and touch the OK button. Touch the Yes button to
confirm.
5. Use the numeric keypad to enter the subnet mask, and touch the OK button. Touch the Yes button
to confirm.
6. Use the numeric keypad to enter the default gateway, and touch the OK button. Touch the Yes
button to confirm.
Rename the product on a network
If you want to rename the product on a network so that it can be uniquely identified, use the
HP Embedded Web Server.
1. To open the HP Embedded Web Server, type the product IP address into the address line of a
Web browser.
NOTE: You can also access the HP Embedded Web Server from the HP Device Toolbox for
Windows or the HP Utility for Mac OS X.
2. Open the System tab.
3. On the Device Information page, the default product name is in the Device Status field. You
can change this name to uniquely identify this product.
NOTE: Completing the other fields on this page is optional.
4. Click the Apply button to save the changes.
ENWW
Configure IP network settings
59