Filter
Top Products
Menu item Sub-menu item Sub-menu item Values Description
Dialing Prefix Off (default)
Custom
Use this feature to specify a prefix number
that must be dialed when sending faxes from
the device.
Billing Codes Off (default)
Custom
When billing codes are enabled, a prompt
appears that asks the user to enter the billing
code for an outgoing fax.
Minimum Length The range is between 1 and 16 digits. The default is 1 digit.
Fax Receive Settings Rings To Answer
The range varies by
location. The factory
default is 2 rings.
Use this feature to specify the number of rings
that must occur before the fax modem
answers.
Ring Interval Default (default)
Custom
Use this feature to control the time between
rings for incoming faxes.
Ring Frequency Default (default)
Custom
Use this feature to control the upper limit of
the ring detect frequency.
Ringer Volume Off
Low (default)
High
Set the volume for the fax ring-tone.
Blocked Fax
Numbers
Add Blocked
Numbers
Type the fax number
to add.
Use this feature to add or delete numbers
from the blocked fax list. The blocked fax list
can contain up to 30 numbers. When the
device receives a call from one of the blocked
fax numbers, it deletes the incoming fax. It
also logs the blocked fax in the activity log
along with job-accounting information.
Remove Blocked
Numbers
Select a fax number
to remove.
Clear All Blocked
Numbers
No (default)
Yes
Table 2-12 Fax Setup menu (continued)
38 Chapter 2 Control panel ENWW