Filter
Top Products
3. Make sure that the environmental specifications for the device are being met. See Operating
environment on page 252.
4. Replace the print cartridge.
Scattered lines
Figure 12-86 Scattered lines
1. Make sure that the type and quality of the media you are using meet HP specifications. See
Supported paper and print media sizes on page 81.
2. Make sure that the environmental specifications for the device are being met. See
Operating
environment on page 252.
3. Turn over the stack in the tray. Also, try rotating the stack 180°.
4. Open the Administration menu at the device control panel. Open the Print Quality submenu and
change the Toner Density setting. See
Print Quality menu on page 42.
Blurred print
Figure 12-87 Blurred print
1. Make sure that the type and quality of the media you are using meet HP specifications. See
Supported paper and print media sizes on page 81.
2. Make sure that the environmental specifications for the device are being met. See
Operating
environment on page 252.
3. Turn over the stack in the tray. Also, try rotating the stack 180°.
4. Do not use media that already has been run through the device.
5. Decrease the toner density. Open the Administration menu at the device control panel. Open the
Print Quality submenu and change the Toner Density setting. See
Print Quality menu
on page 42.
226 Chapter 12 Problem solve ENWW