Filter
Top Products
Default Print Options
Administration > Default Job Options > Default Print Options
Use this menu to set default options for jobs that are sent from a computer.
NOTE: Values shown with “(default)” are the factory-default values. Some menu items have no default.
Table 2-6 Default Print Options menu
Menu item Sub-menu item Values Description
Copies Per Job Type a value. Use this feature to set the default
number of copies for print jobs.
Default Paper Size (List of supported sizes.) Choose a paper size.
Default Custom Paper
Size
Unit of measure Millimeters
Inches
Configure the default paper size that is
used when the user selects Custom as
the paper size for a print job.
X Dimension Configure the width measurement for
the Default Custom Paper Size.
Y Dimension Configure the height measurement for
the Default Custom Paper Size.
Output Bin <Binname> Select the default output bin for print
jobs.
Print Sides 1-sided (default)
2-sided
Use this feature to select whether print
jobs should be single-sided or double-
sided by default.
2-Sided Format Long edge
Short edge
Use this feature to configure the default
style for 2-sided print jobs. If Long edge
is selected, the back side of the page is
printed the right way up. This option is for
print jobs that are bound along the left
edge. If Short edge is selected, the back
side of the page is printed upside-down.
This option is for print jobs that are
bound along the top edge.
22 Chapter 2 Control panel ENWW