Filter
Top Products
Hardware options installation 33
Installing the FBWC module and capacitor pack
To install the component:
CAUTION: The cache module connector does not use the industry standard DDR3 mini DIMM
pinout. Do not use this controller with cache modules designed for other controller models,
because the controller can malfunction and you can lose data. Also, do not transfer this cache
module to an unsupported controller model, because you can lose data.
1. Back up all data.
2. Close all applications.
3. Power down the server (on page 7).
CAUTION: In systems that use external data storage, be sure that the server is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the drives as failed when the server is powered up.
4. For ML110 G6 Servers, extend the server from the rack.
5. For ML150 G6 Servers, do one of the following:
o Unlock and remove the bezel ("Remove the tower bezel (ML150 G6 servers)" on page 8).
o Extend the server from the rack.
6. Remove the access panel (on page 7).
7. Install the storage controller, if not installed ("Installing a storage controller" on page 29).
8. Connect the capacitor pack cable to the connector on the top of the cache module.