Filter
Top Products
CLI commands
vap0 to vap3
Allows a specific priority level to be specified for all traffic on a VAP (VSC)
profile. This enables client stations without a QoS mechanism to set traffic
priority by connecting to the appropriate SSID.
If you enable this priority mechanism, it takes precedence regardless of the
priority mechanism supported by associated client stations. For example,
if you set SSID-based low priority for a profile, all devices that connect to
the profile have their traffic set at this priority
Mapping to the traffic queues is as follows: vap0 or very-high=queue 1,
vap1 or high=queue 2, vap2 or normal=queue 3, vap3 or low=queue 4
diffsrv Differential services is a method for defining IP traffic priority on a per-hop
basis. The Differential Service bits are defined in RFC2474 and are
composed of the six most significant bits of the IP TOS field. These bits
define the class selector code points which the CN320 maps to the
appropriate traffic queue. (default setting)
tos The IP TOS (type of service) field can be used to mark prioritization or
special handling for IP packets.
upstream diffserv tagging
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
upstream diffserv tagging
Enables upstream diffserv tagging.
no upstream diffserv tagging
Disables upstream diffserv tagging.
wmm advertising
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
wmm advertising
Enables WMM information element advertising.
no wmm advertising
Disables WMM information element advertising.
location-aware group
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
location-aware group <name>
Sets the specified group name for the access point.
no location-aware group
Deletes the specified group name for the access point.
end
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
end
Switches to parent context.
2-65